CONTACT US: 0422448944 
TREATMENT PROCESS
Aluminium and steel sheets are processed appropriately, coated on one side with a wood-look or plain-colour PVC film for exterior applications (manufactured by RENOLIT® or HORNSCHUCH®), and then glued by means of a specific outdoor adhesive. The finished side is finally coated with a removable protective film.
TYPE 1. ALUMINIUM SHEET METAL FOR DEEP DRAWING
APPLICATIONS.
This kind of sheet metal is used to manufacture front door panels.
STANDARD SIZES.
Aluminium: 2100x900 mm
2250x1000 mm
Other sizes available upon request
TOTAL THICKNESS.
1,2mm (1,0mm aluminium + 0,2mm PVC)
TYPE 2. STEEL OR ALUMINIUM SHEET METAL FOR BENDING
APPLICATIONS.
This kind of sheet metal is used to manufacture joints for window profiles and sills, column cladding, and generic infill walls, as well as in the aluminium and PVC window industry.
STANDARD SIZES.
Aluminium: 3000x1300 mm
4000x1300 mm
Steel: 3000x1250 mm
Other sizes available upon request
TOTAL THICKNESS.
Aluminium:
1,4mm (1,2mm aluminium + 0,2mm PVC)
1,2mm (1,0mm aluminium + 0,2mm PVC)
Steel:
0,8mm (0,6mm steel + 0,2mm PVC)
TYPE 3. HPL SHEETS
APPLICATIONS.
This kind of sheets is used to manufacture doors, sandwich panels for infill walls, ventilated walls and so on.
STANDARD SIZES.
2150 x 900 mm
2250 x 1000 mm
3050 x 1300 mm
Other sizes available upon request
TOTAL THICKNESS.
The sheet thickness may vary depending on the sheet size.
Standard thicknesses: 1 / 2 / 4 / 6mm
TYPE 4. OTHER USES AND MANUFACTURING PROCESSES
New Door can manufacture claddings for several industries, from the shipbuilding to the caravan sector — as well as for mobile homes, furniture and ventilated façades.
Our know-how allows us to clad not only sheet metal, but also honeycomb materials, Alucobond panels, HPL sheets, and MDF panels.